Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 51037, a Parker Hannifin Corporation item with the NSN 4320013073855 that is listed alongside the description “Motor Hydraulic.” If you are interested in part number 51037 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 51037 is specifically listed with the NSN 4320-01-307-3855, and this code can be used to determine that it falls under FSC 4320 Power And Hand Pumps. Additionally, while tracing back to Parker Hannifin Corporation, this NSN part was specifically produced under CAGE Code 9F512. With our services and dedication to simple procurement in mind, get started with us today!
| MRC | Criteria | Characteristic |
|---|---|---|
| ARQA | SHAFT PROTRUSION LENGTH | 1.690 INCHES NOMINAL |
| ASMM | CONNECTION QUANTITY | 2 AND 1 |
| ABUJ | THREAD SIZE | 0.250-16 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AZFF | BOLT HOLE SPACING | 1.190 IN. BY 2.310 IN. |
| AJLF | HOUSING MATERIAL | STEEL |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGJS | PITCH DIAMETER | 1.137 INCHES MINIMUM AND 1.146 INCHES MAXIMUM |
| AAPL | TORQUE LOAD RATING | 3218.0 INCH-POUNDS |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | SAE-J518B |
| AZFG | MOUNTING BOLT HOLE SPACING | 4.508 IN. BY 4.508 IN. |
| ASAP | SPLINE PITCH | 12/24 |
| APJC | THREAD LOCATION | INTERNAL |
| AAUH | SPLINE MINOR DIAMETER | 1.0497 INCHES MINIMUM AND 1.0627 INCHES MAXIMUM |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AAUJ | SPLINE MAJOR DIAMETER | 1.2243 INCHES MINIMUM AND 1.2293 INCHES MAXIMUM |
| AXFC | CONNECTION DESIGN | FLANGED AND THREADED |
| ABSA | SPLINE QUANTITY | 14 |
| AXFD | BOLT HOLE THREAD SIZE | 0.438-14 |
| AXFH | SPLINE LENGTH | 1.000 INCHES NOMINAL |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| ABTB | MOUNTING HOLE DIAMETER | 0.560 INCHES NOMINAL |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 8.080 CUBIC INCHES |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 4000.0 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| AAXX | MOUNTING TYPE | PAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
