Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number S280, a Parker Hannifin Corporation item with the NSN 4720009748208 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number S280 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number S280 is specifically listed with the NSN 4720-00-974-8208, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Parker Hannifin Corporation, this NSN part was specifically produced under CAGE Code 98441. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-974-8208 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 009748208 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| R23693 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 0.880 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.187 INCHES MINIMUM AND 0.218 INCHES MAXIMUM 1ST END |
| ABKU | FLANGE THICKNESS | 0.187 INCHES MINIMUM AND 0.218 INCHES MAXIMUM 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.110 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.414 INCHES NOMINAL 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.414 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.414 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.414 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AFQN | FLANGE LENGTH | 2.000 INCHES MINIMUM AND 2.180 INCHES MAXIMUM 1ST END |
| AFQN | FLANGE LENGTH | 2.000 INCHES MINIMUM AND 2.180 INCHES MAXIMUM 2ND END |
| AGFF | FLANGE WIDTH | 2.000 INCHES MINIMUM AND 2.180 INCHES MAXIMUM 1ST END |
| AGFF | FLANGE WIDTH | 2.000 INCHES MINIMUM AND 2.180 INCHES MAXIMUM 2ND END |
| AHNC | CONNECTION STYLE | RAISED 1ST END |
| AHNC | CONNECTION STYLE | RAISED 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM 2ND END |
| AJED | RAISED FACE HEIGHT | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM 1ST END |
| AJED | RAISED FACE HEIGHT | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM 2ND END |
| AJEE | RAISED FACE DIAMETER | 1.495 INCHES MINIMUM AND 1.500 INCHES MAXIMUM 1ST END |
| AJEE | RAISED FACE DIAMETER | 1.495 INCHES MINIMUM AND 1.500 INCHES MAXIMUM 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CQBD | BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 19.760 INCHES MINIMUM WORKING AND 20.000 INCHES MAXIMUM WORKING |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| FEAT | SPECIAL FEATURES | HOSE PREBENT TO A FIXED POSITION AND SUPPLIED W/SIX CLAMPS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
