Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number SW355 6X50 W TIX60F, a Parker Hannifin Corporation item with the NSN 4720014262459 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number SW355 6X50 W TIX60F and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number SW355 6X50 W TIX60F is specifically listed with the NSN 4720-01-426-2459, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Parker Hannifin Corporation, this NSN part was specifically produced under CAGE Code 65948. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-426-2459 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014262459 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SW355 6X50 W/TIX60F | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | Inside Diameter | 6.000 INCHES NOMINAL |
| AECS | Bolt Hole Quantity | 8 1ST END |
| CQCS | Layer Composition And Location | 1ST LAYER SPIRALLY LAID POLYAMIDE CORD |
| ABKV | Outside Diameter | 7.000 INCHES NOMINAL |
| AJEE | Raised Face Diameter | 8.500 INCHES NOMINAL 1ST END |
| CRWL | Inside Surface Condition | SMOOTH |
| MRC | Decoded Requirement | Clear Text Reply |
| AKUT | End Flange Construction | SOLID 1ST END |
| ADJS | Exterior Color | RED |
| AJED | Raised Face Height | 0.562 INCHES NOMINAL 1ST END |
| CQGM | Maximum Operating Pressure | 300.0 POUNDS PER SQUARE INCH |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| CRXX | Measuring Method And Length | 50.0 FEET NOMINAL OVERALL |
| AWLS | Connection Type | RAISED FACE FLANGE 1ST END |
| ABKU | Flange Thickness | 1.000 INCHES NOMINAL 1ST END |
| AEPR | Flange Outside Diameter | 11.000 INCHES NOMINAL 1ST END |
| ACKH | Minimum Inside Bending Radius | 36.000 INCHES |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 180.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CTCJ | Flange Style | ROUND W/ BOLT HOLES 1ST END |
| CRJM | Outer Covering Environmental Protection | OIL RESISTANT AND ABRASION RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| AHNC | Connection Style | RAISED 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| CQCS | Layer Composition And Location | 2ND LAYER HELIX WIRE COIL |
| ABKG | Bolt Circle Diameter | 9.500 INCHES NOMINAL 1ST END |
| AHNX | Bolt Hole Diameter | 0.875 INCHES NOMINAL 1ST END |
| CQCS | Layer Composition And Location | 3RD LAYER HELIX WIRE COIL |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| CQCS | Layer Composition And Location | 4TH LAYER SPIRALLY LAID POLYAMIDE CORD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
