Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 31884, a Pdi Ground Support Systems Inc item with the NSN 2530007320801 that is listed alongside the description “Lever Remote Control.” If you are interested in part number 31884 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 31884 is specifically listed with the NSN 2530-00-732-0801, and this code can be used to determine that it falls under FSC 2530 Vehicular Brake Steering Axle Wheel and Track Components. Additionally, while tracing back to Pdi Ground Support Systems Inc, this NSN part was specifically produced under CAGE Code 0W357. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-732-0801 Item Description: LEVER,REMOTE CONTROL | 2530 | 007320801 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 31884 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 1.500 INCHES NOMINAL" |
| ABXV | BORE DIAMETER | 0.505 INCHES MINIMUM AND 0.506 INCHES MAXIMUM" |
| ADGE | BORE LENGTH | 0.500 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | BRAKE WARNING DEVICE,VEHICULAR" |
| ASBP | BORE TYPE | PLAIN STRAIGHT" |
| BFGW | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 7.876 INCHES NOMINAL" |
| BFGX | SHAFT END THICKNESS | 0.500 INCHES NOMINAL" |
| BFGY | LINK END THICKNESS | 0.500 INCHES NOMINAL" |
| BFHA | LINK END HOLE DIAMETER | 0.509 INCHES MINIMUM AND 0.510 INCHES MAXIMUM" |
| MATT | III MATERIAL | STEEL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR AISI/SAE 1025 ASSN STD 2ND MATERIAL RESPONSE" |
| STYL | STYLE DESIGNATOR | FLAT, TWO HOLE LINK END" |
| ABMK | OVERALL WIDTH | 1.500 INCHES NOMINAL" |
| ABXV | BORE DIAMETER | 0.505 INCHES MINIMUM AND 0.506 INCHES MAXIMUM" |
| ADGE | BORE LENGTH | 0.500 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | BRAKE WARNING DEVICE,VEHICULAR" |
| ASBP | BORE TYPE | PLAIN STRAIGHT" |
| BFGW | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 7.876 INCHES NOMINAL" |
| BFGX | SHAFT END THICKNESS | 0.500 INCHES NOMINAL" |
| BFGY | LINK END THICKNESS | 0.500 INCHES NOMINAL" |
| BFHA | LINK END HOLE DIAMETER | 0.509 INCHES MINIMUM AND 0.510 INCHES MAXIMUM" |
| MATT | III MATERIAL | STEEL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR AISI/SAE 1025 ASSN STD 2ND MATERIAL RESPONSE" |
| STYL | STYLE DESIGNATOR | FLAT, TWO HOLE LINK END" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
