Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number DP-862, a Phillips Corporation item with the NSN 3020012388801 that is listed alongside the description “Gear Helical.” If you are interested in part number DP-862 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number DP-862 is specifically listed with the NSN 3020-01-238-8801, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Phillips Corporation, this NSN part was specifically produced under CAGE Code 1B589. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-238-8801 Item PartTypeName: GEAR,HELICAL | 3020 | 012388801 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| DP-862 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 2.4998 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 40 |
| ANTP | BORE STYLE | W/COUNTERBORE SECOND END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH BODY,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.585 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 36.8667 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.469 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.938 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.624 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.083 INCHES BOTH ENDS |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.375 INCHES COUNTER BORE,SECOND END |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 1.999 INCHES COUNTER BORE,SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 2 GROOVES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 1.250 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.185 INCHES SECOND END |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.058 INCHES FIRST END |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.062 INCHES SECOND END |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 1.195 INCHES FIRST END |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 2.145 INCHES SECOND END |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.407 INCHES SECOND END |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.474 INCHES FIRST END |
| CWYR | SECOND GROOVE NOMINAL WIDTH | 0.062 INCHES FIRST END |
| CWYW | SECOND GROOVE NOMINAL DIAMETER | 1.210 INCHES FIRST END |
| CWZC | NOMINAL DISTANCE FROM END TO SECOND GROOVE | 1.814 INCHES FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.125 INCHES AXIALLY THROUGH BODY,FIRST END |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 1.875 INCHES AXIALLY THROUGH BODY,FIRST END |
| MATT | MATERIAL | STEEL COMP 8620 OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
