Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 68A690879-2015-2017-2019, a Plastifab Incorporated item with the NSN 5340012575231 that is listed alongside the description “Clamp Block.” If you are interested in part number 68A690879-2015-2017-2019 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 68A690879-2015-2017-2019 is specifically listed with the NSN 5340-01-257-5231, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Plastifab Incorporated, this NSN part was specifically produced under CAGE Code 58870. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-257-5231 Item PartTypeName: CLAMP,BLOCK | 5340 | 012575231 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 68A690879-2017 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 3.560 INCHES MINIMUM AND 3.590 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.758 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| CWTD | CLAMPING HOLE QUANTITY | 5 |
| CWWM | CLAMPING HOLE DIAMETER | 0.391 INCHES MINIMUM FOURTH HOLE AND 0.395 INCHES MAXIMUM FOURTH HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.391 INCHES MINIMUM SECOND HOLE AND 0.395 INCHES MAXIMUM SECOND HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.391 INCHES MINIMUM THIRD HOLE AND 0.395 INCHES MAXIMUM THIRD HOLE |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 0.870 INCHES MINIMUM AND 0.874 INCHES MAXIMUM |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 0.600 INCHES MINIMUM AND 0.602 INCHES MAXIMUM |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 2.133 INCHES NOMINAL |
| CWYM | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES | 3.060 INCHES MINIMUM AND 3.064 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | HAS 2 SLOTTED CLAMPING HOLES ON EACH END,LG 0.313 IN.,WIDTH 0.205 IN. TO 0.211 IN. |
| MATT | MATERIAL | PLASTIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-15035 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
