Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 6373-21, a Preece Incorporated item with the NSN 4720014118418 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number 6373-21 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 6373-21 is specifically listed with the NSN 4720-01-411-8418, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Preece Incorporated, this NSN part was specifically produced under CAGE Code 21392. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-411-8418 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014118418 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| WHGP-U64J-21 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKU | Flange Thickness | 0.500 INCHES NOMINAL 1ST END |
| ABKU | Flange Thickness | 0.500 INCHES NOMINAL 2ND END |
| AARX | Inside Diameter | 4.050 INCHES NOMINAL |
| AECS | Bolt Hole Quantity | 8 1ST END |
| AJEE | Raised Face Diameter | 4.281 INCHES NOMINAL 2ND END |
| CTCJ | Flange Style | ROUND W/ BOLT HOLES 1ST END |
| CRWL | Inside Surface Condition | CONVOLUTED |
| AWLS | Connection Type | RAISED FACE FLANGE 1ST END |
| AKUT | End Flange Construction | SOLID 1ST END |
| AKUU | End Connection Design | ELBOW 2ND END |
| AJEE | Raised Face Diameter | 4.281 INCHES NOMINAL 1ST END |
| CBBL | Features Provided | INTERNAL SUPPORT |
| CQGM | Maximum Operating Pressure | 200.0 POUNDS PER SQUARE INCH |
| AECS | Bolt Hole Quantity | 8 2ND END |
| AKUT | End Flange Construction | SOLID 2ND END |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| CRFY | Flow Angle | 90.0 DEGREES 2ND END |
| ABKG | Bolt Circle Diameter | 6.562 INCHES NOMINAL 2ND END |
| AWLS | Connection Type | RAISED FACE FLANGE 2ND END |
| CRXX | Measuring Method And Length | 81.810 INCHES NOMINAL OVERALL |
| AEPR | Flange Outside Diameter | 7.688 INCHES NOMINAL 2ND END |
| ABJH | Temp Rating | 410.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | Outside Diameter | 4.500 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| CTCJ | Flange Style | ROUND W/ BOLT HOLES 2ND END |
| CQBD | Burst Test Pressure | 800.0 POUNDS PER SQUARE INCH |
| AHNC | Connection Style | RAISED SWIVEL 2ND END |
| ACKH | Minimum Inside Bending Radius | 24.000 INCHES |
| FEAT | Special Features | TWO HOSE ASSEMBLIES CONNECTED BY 90 DEG ELBOW, FIRST LEG LENGTH 40.31, SECOND LEG LENGTH 41.50 |
| CRSM | Vacuum In Torr | 50.8 |
| ABKG | Bolt Circle Diameter | 6.562 INCHES NOMINAL 1ST END |
| AEPR | Flange Outside Diameter | 7.688 INCHES NOMINAL 1ST END |
| AHNX | Bolt Hole Diameter | 0.562 INCHES NOMINAL 1ST END |
| AHNX | Bolt Hole Diameter | 0.562 INCHES NOMINAL 2ND END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| AHNC | Connection Style | RAISED SWIVEL 1ST END |
| CQCS | Layer Composition And Location | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
