Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 240-1181P2, a Raytheon Company item with the NSN 5905005018184 that is listed alongside the description “Resistor Variable Wire Wound Non.” If you are interested in part number 240-1181P2 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 240-1181P2 is specifically listed with the NSN 5905-00-501-8184, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Raytheon Company, this NSN part was specifically produced under CAGE Code 94144. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-501-8184 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 005018184 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AP1-1-8-121 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.875 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.375 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.000 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.468 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 310.0 NOMINAL |
| AEFN | NONTURN DEVICE LOCATION | AT 3 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.500 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 25.000 KILOHMS ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 320.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 HEAT SINK 2ND SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 HEAT SINK 1ST SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 80.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 49956-2401181 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
