Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 536355, a Reed Tool Co Diamond Metal Alloys item with the NSN 5340009143751 that is listed alongside the description “Bracket Angle.” If you are interested in part number 536355 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 536355 is specifically listed with the NSN 5340-00-914-3751, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Reed Tool Co Diamond Metal Alloys, this NSN part was specifically produced under CAGE Code 26195. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-914-3751 Item PartTypeName: BRACKET,ANGLE | 5340 | 009143751 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 536355 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 1.125 INCHES MINIMUM AND 1.155 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 1.325 INCHES MINIMUM AND 1.357 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | ENGINE,AIRCRAFT J-52 |
| AHLF | SECOND LEG WIDTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| AHLG | SECOND LEG CORNER RADIUS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.272 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| AHLZ | SECOND LEG SLOT LENGTH | 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AHMA | SECOND LEG SLOT WIDTH | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AJFP | FIRST LEG END RADIUS | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | END RADIUS AND TAPERED |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 78.5 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
