Request a Quote for 11827D4-35A Reid Products Inc Part With the NSN 5305-01-481-0078 Today

Part Number: 11827D4-35A

Alternate P/N: 11827D435A

Manufacturer: Reid Products Inc

NSN: 5305-01-481-0078

NIIN: 014810078

Item Name : Screw Close Tolerance

CAGE Code: 59563

FSC: 5305 Screws

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 11827D4-35A, a Reid Products Inc item with the NSN 5305014810078 that is listed alongside the description “Screw Close Tolerance.” If you are interested in part number 11827D4-35A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 11827D4-35A is specifically listed with the NSN 5305-01-481-0078, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to Reid Products Inc, this NSN part was specifically produced under CAGE Code 59563. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 11827D4-35A with NSN 5305-01-481-0078, 5305014810078

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-481-0078 Item Description: SCREW,CLOSE TOLERANCE	5305	014810078	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
11827D4-35A	3	2	5

Characteristics Data of NSN 5305-01-481-0078, 5305014810078

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.425 INCHES NOMINAL
AASB	FASTENER LENGTH	2.5980 INCHES MINIMUM AND 2.6280 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.4970 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM
AAUH	SPLINE MINOR DIAMETER	0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
AAUJ	SPLINE MAJOR DIAMETER	0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	TORX
AGAV	END ITEM IDENTIFICATION	F18 E/F
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	2.1780 INCHES MINIMUM AND 2.1980 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRTL	CRITICALITY CODE JUSTIFICATION	AGAV
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,100 DEGREE TENSION HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)
MATT	MATERIAL	STEEL COMP XM-13 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.425 INCHES NOMINAL
AASB	FASTENER LENGTH	2.5980 INCHES MINIMUM AND 2.6280 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.4970 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM
AAUH	SPLINE MINOR DIAMETER	0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
AAUJ	SPLINE MAJOR DIAMETER	0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	TORX
AGAV	END ITEM IDENTIFICATION	F18 E/F
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	2.1780 INCHES MINIMUM AND 2.1980 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRTL	CRITICALITY CODE JUSTIFICATION	AGAV
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,100 DEGREE TENSION HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)
MATT	MATERIAL	STEEL COMP XM-13 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF