Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 11825D5-16A, a Reid Products Inc item with the NSN 5305014819434 that is listed alongside the description “Screw Close Tolerance.” If you are interested in part number 11825D5-16A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 11825D5-16A is specifically listed with the NSN 5305-01-481-9434, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to Reid Products Inc, this NSN part was specifically produced under CAGE Code 59563. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-481-9434 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014819434 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HP1170D5-16 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL" |
| AASB | FASTENER LENGTH | 1.469 INCHES NOMINAL" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.312 INCHES NOMINAL" |
| AAVA | POINT DIAMETER | 0.469 INCHES NOMINAL" |
| ABQJ | POINT STYLE | FLAT" |
| ABQZ | INTERNAL DRIVE STYLE | TORX" |
| AGAV | END ITEM IDENTIFICATION | F/A-18E, F/A-18F" |
| AHYM | NOMINAL THREAD DIAMETER | 0.313 INCHES" |
| ANEE | GRIP LENGTH | 1.000 INCHES NOMINAL" |
| CMLP | THREAD QUANTITY PER INCH | 24" |
| CQBC | MINIMUM TENSILE STRENGTH | 5820 POUNDS PER SQUARE INCH" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)." |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL" |
| AASB | FASTENER LENGTH | 1.469 INCHES NOMINAL" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.312 INCHES NOMINAL" |
| AAVA | POINT DIAMETER | 0.469 INCHES NOMINAL" |
| ABQJ | POINT STYLE | FLAT" |
| ABQZ | INTERNAL DRIVE STYLE | TORX" |
| AGAV | END ITEM IDENTIFICATION | F/A-18E, F/A-18F" |
| AHYM | NOMINAL THREAD DIAMETER | 0.313 INCHES" |
| ANEE | GRIP LENGTH | 1.000 INCHES NOMINAL" |
| CMLP | THREAD QUANTITY PER INCH | 24" |
| CQBC | MINIMUM TENSILE STRENGTH | 5820 POUNDS PER SQUARE INCH" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)." |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
