Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 44Q1464SP, a Renegar Driggers Machinery Company item with the NSN 4720013665550 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number 44Q1464SP and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 44Q1464SP is specifically listed with the NSN 4720-01-366-5550, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Renegar Driggers Machinery Company, this NSN part was specifically produced under CAGE Code 00D27. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-366-5550 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013665550 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 44Q1464SP | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AGAV | END ITEM IDENTIFICATION | 3810-01-268-1737,TRUCK MOUNTED CRANE |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 349.000 INCHES NOMINAL OVERALL |
| ABKV | OUTSIDE DIAMETER | 1.230 INCHES NOMINAL |
| AFQN | FLANGE LENGTH | 2.590 INCHES NOMINAL 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABKU | FLANGE THICKNESS | 0.265 INCHES NOMINAL 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.875 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.875 INCHES NOMINAL 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AGFF | FLANGE WIDTH | 2.060 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL 1ST END |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| AHNC | CONNECTION STYLE | PLAIN 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| FEAT | SPECIAL FEATURES | BOTH ENDS HAVE CRIMPED FLANGES,WITH 0-RING,ONE IS WELD FITTING |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
