Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 318314, a Rexnord Gmbh item with the NSN 3020007063116 that is listed alongside the description “Gear Helical.” If you are interested in part number 318314 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 318314 is specifically listed with the NSN 3020-00-706-3116, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Rexnord Gmbh, this NSN part was specifically produced under CAGE Code 21444. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-706-3116 Item PartTypeName: GEAR,HELICAL | 3020 | 007063116 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 318314 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 11.6250 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 93 |
| ANTP | BORE STYLE | TAPERED W/KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 285.0 BRINELL STANDARD MINIMUM OVERALL AND 325.0 BRINELL STANDARD MAXIMUM OVERALL |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH BODY,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 11.842 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 30.0483 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.500 INCHES FIRST END |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.875 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 2.750 INCHES |
| CWSN | KEYWAY NOMINAL WIDTH | 0.501 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.403 INCHES BOTH ENDS |
| CWSW | TAPER MAJOR NOMINAL DIAMETER | 2.244 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWWH | END NOMINAL LENGTH | 0.375 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 2.750 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.625 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 4.125 INCHES FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.750 INCHES AXIALLY THROUGH BODY,FIRST END |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 6.750 INCHES AXIALLY THROUGH BODY,FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY NO. 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB,RECESSED BODY |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
