Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 11M950, a Rockwell Automation Ltd item with the NSN 5905004302020 that is listed alongside the description “Resistor Variable Nonwire Wound Nonprecision.” If you are interested in part number 11M950 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 11M950 is specifically listed with the NSN 5905-00-430-2020, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Rockwell Automation Ltd, this NSN part was specifically produced under CAGE Code 01121. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-430-2020 Item Description: Resistor Variable Nonwire Wound Nonprecision | 5905 | 004302020 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11m950 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 0.469 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CSDL | STANDARD TAPER CURVE PER SECTION | A ALL SECTIONS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS ALL SECTIONS |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| ABWV | SHAFT DIAMETER | 0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.656 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, FLATTED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| ABXF | SHAFT LENGTH | 0.750 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 ALL SECTIONS |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| ABNB | FIRST FLAT LENGTH | 0.250 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| ABNC | FLAT HEIGHT | 0.094 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.305 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAPN | SECTION QUANTITY | 2 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
