Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number GWL2238, a Rockwell Automation Ltd item with the NSN 5905007550860 that is listed alongside the description “Resistor Variable Nonwire Wound.” If you are interested in part number GWL2238 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number GWL2238 is specifically listed with the NSN 5905-00-755-0860, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Rockwell Automation Ltd, this NSN part was specifically produced under CAGE Code 01121. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-755-0860 Item Description: RESISTOR,VARIABLE,NONWIRE WOUND, | 5905 | 007550860 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GWL2238 | 3 | 1 | C | 9 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | OVERALL LENGTH | 1.130 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM" |
| ADAP | MOUNTING BUSHING LENGTH | 0.380 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.450 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 0.500 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFL | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES" |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES" |
| AEFN | NONTURN DEVICE LOCATION | AT 4'30 OCLOCK AND AT 10'30 OCLOCK" |
| AEFP | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF" |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0" |
| APXH | TERMINAL LOCATION | REAR END" |
| AXGY | MOUNTING METHOD | LOCKING BUSHING" |
| CBBL | FEATURES PROVIDED | SHAFT LOCKING DEVICE AND SHAFT SEAL" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 MEGOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 NOMINAL" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| CSDL | UNABLE TO DECODE | UNABLE TO DECODE" |
| TEST | TEST DATA DOCUMENT | 79500-2JC2779 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | OVERALL LENGTH | 1.130 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM" |
| ADAP | MOUNTING BUSHING LENGTH | 0.380 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.450 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 0.500 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFL | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES" |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES" |
| AEFN | NONTURN DEVICE LOCATION | AT 4'30 OCLOCK AND AT 10'30 OCLOCK" |
| AEFP | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF" |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0" |
| APXH | TERMINAL LOCATION | REAR END" |
| AXGY | MOUNTING METHOD | LOCKING BUSHING" |
| CBBL | FEATURES PROVIDED | SHAFT LOCKING DEVICE AND SHAFT SEAL" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 MEGOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 NOMINAL" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| CSDL | UNABLE TO DECODE | UNABLE TO DECODE" |
| TEST | TEST DATA DOCUMENT | 79500-2JC2779 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
