Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number J-97931, a Rockwell Automation Ltd item with the NSN 5905011209041 that is listed alongside the description “Resistor Variable Nonwire Wound.” If you are interested in part number J-97931 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number J-97931 is specifically listed with the NSN 5905-01-120-9041, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Rockwell Automation Ltd, this NSN part was specifically produced under CAGE Code 01121. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-120-9041 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 011209041 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| JJCW97931 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPA | UNDERCUT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.156 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.500 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.281 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.359 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFP | NONTURN DEVICE RADIUS | 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM |
| AGQL | UNDERCUT LENGTH | 0.500 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | PANEL SEAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.25 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | BOTH SHAFTS FLATTED |
| TEST | TEST DATA DOCUMENT | 10001-3178149 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
