Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 230-0284-000, a Rockwell Collins Aerospace item with the NSN 3010006799396 that is listed alongside the description “Gearcase Motor.” If you are interested in part number 230-0284-000 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 230-0284-000 is specifically listed with the NSN 3010-00-679-9396, and this code can be used to determine that it falls under FSC 3010 Torque Converters and Speed Changers. Additionally, while tracing back to Rockwell Collins Aerospace, this NSN part was specifically produced under CAGE Code 13499. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-679-9396 Item PartTypeName: GEARCASE-MOTOR | 3010 | 006799396 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2602 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 1.375 INCHES |
| AAJU | OVERALL LENGTH | 3.385 INCHES |
| AAJV | OVERALL WIDTH | 1.124 INCHES |
| AAUB | HOLE DIAMETER | 0.0620 INCHES NOMINAL SINGLE END |
| AAZQ | HOLE DEPTH | 0.1870 INCHES NOMINAL SINGLE END |
| ABWV | SHAFT DIAMETER | 0.1874 INCHES NOMINAL SINGLE END |
| ACDC | CURRENT TYPE | DC INPUT |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | 0.0940 INCHES NOMINAL SINGLE END |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | 75000.0 FEET |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | INTERMITTENT |
| AXCP | WINDING TYPE | SERIES WOUND |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| BFLT | TIME INTERVAL | 2.0 SECONDS MAXIMUM ON AND 3.0 SECONDS MINIMUM OFF |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | 2.0 INCH-POUNDS RUNNING AND 2.5 INCH-POUNDS STALLED AND 2.5 INCH-POUNDS STARTING |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC REMOTE |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.550 INCHES SINGLE END |
| CWDY | TEMP RATING | -55.0 OPERATING DEG CELSIUS AND 85.0 OPERATING DEG CELSIUS |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.812 INCHES |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES |
| CWGL | CURRENT RATING IN AMPS | 0.250 SINGLE OUTPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 27.5 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 33.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A13 SINGLE STYLE SINGLE END |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
