Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 51537, a Rockwell Collins Aerospace item with the NSN 3020004742802 that is listed alongside the description “Gear Spur.” If you are interested in part number 51537 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 51537 is specifically listed with the NSN 3020-00-474-2802, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Rockwell Collins Aerospace, this NSN part was specifically produced under CAGE Code 86831. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-474-2802 Item PartTypeName: GEAR,SPUR | 3020 | 004742802 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 51537 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| AGJS | PITCH DIAMETER | 0.7500 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.781 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.375 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.094 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.189 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.063 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.031 INCHES BOTH ENDS |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.047 INCHES SECOND END |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 0.380 INCHES SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.313 INCHES FIRST END |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.028 INCHES FIRST END |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 0.290 INCHES FIRST END |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.031 INCHES FIRST END |
| MATT | MATERIAL | STEEL COMP E4340H OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI/SAE E4340H FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB,RECESSED BODY |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
