Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number HE271-5005-0003, a Rockwell International Corp item with the NSN 4720009398808 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number HE271-5005-0003 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number HE271-5005-0003 is specifically listed with the NSN 4720-00-939-8808, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Rockwell International Corp, this NSN part was specifically produced under CAGE Code 89372. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-939-8808 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 009398808 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AE700373-3 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.109 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END |
| CQBD | BURST TEST PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 74.5 DEGREES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRSM | VACUUM IN TORR | 406.4 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 9.210 INCHES NOMINAL EXCLUDING END FITTINGS |
| FEAT | SPECIAL FEATURES | 1ST END ELBOW TUBE HAS HOLE DRILLED AND MACHINED TO ACCOMODATE 1/4 IN. TUBE BOSS CONNECTION |
| MEDA | MEDIA FOR WHICH DESIGNED | AIR AND FUEL/OIL,HYDROCARBON AND HYDRAULIC FLUID SINGLE RESPONSEHYDRAULIC FLUID AND FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| TEST | TEST DATA DOCUMENT | 89372-HE271-5005 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
| THSD | THREAD SERIES DESIGNATOR | UNJ 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNJ 2ND END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
