Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number REP5H8E8693, a Roller Bearing Company Of America item with the NSN 3110007025702 that is listed alongside the description “Bearing Ball Rod End.” If you are interested in part number REP5H8E8693 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number REP5H8E8693 is specifically listed with the NSN 3110-00-702-5702, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Roller Bearing Company Of America, this NSN part was specifically produced under CAGE Code 73134. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-702-5702 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 007025702 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SB4002 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZE | SHANK DIAMETER | 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AAZF | SHANK STYLE | HOLLOW |
| ABHP | OVERALL LENGTH | 3.0425 INCHES MINIMUM AND 3.0725 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.2350 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.6462 INCHES MINIMUM AND 0.6662 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.8650 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 2.4275 INCHES MINIMUM AND 2.4475 INCHES MAXIMUM |
| AGXJ | SHANK BORE DIAMETER | 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM |
| AGXK | SHANK BORE DEPTH | 1.5525 INCHES MINIMUM AND 1.5725 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CTLK | SELF-ALIGNMENT ANGLE | 0.40 DEGREES MINIMUM AND 0.60 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | DRILLED HOLE FILLED W/HYSOL 6020 W/25 PCT BY WEIGHT HARDENER C |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SB4002-1,78286 MFR REF SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SB4002-1,78286 MFR REF SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SB4002-1,78286 MFR REF SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SB4002-1,78286 MFR REF SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SB4002-1,78286 MFR REF SINGLE MATERIAL RESPONSE SEAL |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
