Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 23034065, a Rolls Royce Corporation item with the NSN 5340013239023 that is listed alongside the description “Bracket Double Angle.” If you are interested in part number 23034065 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 23034065 is specifically listed with the NSN 5340-01-323-9023, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Rolls Royce Corporation, this NSN part was specifically produced under CAGE Code 63005. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-323-9023 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 013239023 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 23034065 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 1.878 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 1.440 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.087 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.087 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | CUT OUT |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | 0.070 IN. HOLE DIA SECOND LEG ALONG W ONE PLACE; 0.180 IN. MIN AND 0.186 IN. MAX HOLE DIA FOUR PLACES IN 1.767 IN. BOLT CIRCLE DIA ALL IN SECOND LEG |
| MATT | MATERIAL | STEEL COMP 321 |
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLL | SECOND LEG LENGTH | 2.600 INCHES NOMINAL |
| AFPW | REINFORCEMENT METHOD | TURNED EDGE AND GUSSET |
| AHLF | SECOND LEG WIDTH | 3.300 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.340 INCHES NOMINAL |
| AHPZ | CENTER SECTION HEIGHT | 0.595 INCHES NOMINAL |
| AHQA | CENTER SECTION WIDTH | 3.060 INCHES NOMINAL |
| AHQB | CENTER SECTION THICKNESS | 0.087 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 3.260 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.672 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.450 INCHES NOMINAL |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| STYL | STYLE DESIGNATOR | ADJACENT ANGLES |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
