Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number AS20708 81, a Sae Customer Service item with the NSN 5990001791871 that is listed alongside the description “Synchro Differential Transmitter.” If you are interested in part number AS20708 81 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number AS20708 81 is specifically listed with the NSN 5990-00-179-1871, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Sae Customer Service, this NSN part was specifically produced under CAGE Code 0VH01. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5990-00-179-1871 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER | 5990 | 001791871 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
7 | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
M20708/81-01B | 1 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | STANDARD ROUND C |
AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
ABHP | OVERALL LENGTH | 2.4060 INCHES NOMINAL |
ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
ABXF | SHAFT LENGTH | 0.5550 INCHES NOMINAL SINGLE SHAFT |
AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
AJSL | BODY SIZE | 11 |
AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
AJSP | STATOR INPUT CURRENT RATING | 49.0 MILLIAMPERES MAXIMUM |
AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 530.0 MILLIWATTS NOMINAL |
AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 1590.00 MINIMUM AND 2050.00 MAXIMUM |
AJTK | ZSO IMPEDANCE ANGLE IN DEG | 79.00 MINIMUM AND 85.00 MAXIMUM |
AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 470.00 MINIMUM AND 570.00 MAXIMUM |
AJTM | ZRS IMPEDANCE ANGLE IN DEG | 23.00 MINIMUM AND 33.00 MAXIMUM |
AJVF | PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 60.00 OUTPUT |
AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 90.00 |
AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES MAXIMUM |
AJVW | ALIGNMENT HOLE QUANTITY | 4 |
AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8510 INCHES NOMINAL |
AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
CQTM | TERMINAL LOCATION | REAR |
CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
CSJY | TRANSFORMATION RATIO | 1.154 ROTOR TO STATOR NOMINAL |
CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/81 GOVERNMENT SPECIFICATION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote