Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number AS6039, a Sae International item with the NSN 3110009153278 that is listed alongside the description “Bearing Ball Rod End.” If you are interested in part number AS6039 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number AS6039 is specifically listed with the NSN 3110-00-915-3278, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Sae International, this NSN part was specifically produced under CAGE Code 0U583. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-00-915-3278 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 009153278 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
REP4ML6 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | LEFT-HAND |
AAZE | SHANK DIAMETER | 0.3750 INCHES NOMINAL |
AAZF | SHANK STYLE | EXTERNALLY THREADED |
ABHP | OVERALL LENGTH | 2.3440 INCHES NOMINAL |
ABXV | BORE DIAMETER | 0.2500 INCHES NOMINAL |
AGGY | SHANK THREAD LENGTH | 1.1250 INCHES NOMINAL |
AGVT | OUTER RING WIDTH | 0.4380 INCHES NOMINAL |
AGVU | INNER RING WIDTH | 0.5930 INCHES NOMINAL |
AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8750 INCHES NOMINAL |
AGYF | RETAINER FABRICATION METHOD | PRESSED |
AGYJ | SEAL QUANTITY | 2 |
AGYW | BEARING SEAL TYPE | CONTACT |
AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
AKVV | INTERNAL CLEARANCE | 0.0000 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL |
CMLP | THREAD QUANTITY PER INCH | 24 |
CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR ROD END BALL BEARING |
CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
LBMA | LUBRICATION MATERIAL | GREASE |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
MATT | MATERIAL | STEEL COMP 301 RETAINER |
MATT | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8620 ROD END BODY |
MATT | MATERIAL | STEEL COMP E52100 BALL |
MATT | MATERIAL | STEEL COMP E52100 INNER RING |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE ROD END BODY |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3625 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote