Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number AS18280, a Sae International item with the NSN 4730006311634 that is listed alongside the description “Bolt Fluid Passage.” If you are interested in part number AS18280 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number AS18280 is specifically listed with the NSN 4730-00-631-1634, and this code can be used to determine that it falls under FSC 4730 Hose Pipe Tube Lubrication and Railing Fittings. Additionally, while tracing back to Sae International, this NSN part was specifically produced under CAGE Code 0U583. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4730-00-631-1634 Item PartTypeName: BOLT,FLUID PASSAGE | 4730 | 006311634 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AS21939 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | BODY WRENCHING |
| AAXC | CONCENTRIC HOLE DIAMETER | 0.422 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.522 INCHES NOMINAL |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACKN | FIRST END STYLE DESIGNATOR | FLARELESS |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACLS | SECOND END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACLT | SECOND END STYLE DESIGNATOR | FLARELESS |
| ACMR | SECOND END THREAD CLASS | 3A |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | 1.121 INCHES MINIMUM AND 1.128 INCHES MAXIMUM |
| ATKZ | FIRST END THREAD LENGTH | 1.051 INCHES MINIMUM AND 1.096 INCHES MAXIMUM |
| ATLF | SECOND END THREAD LENGTH | 0.625 INCHES NOMINAL |
| BBDF | WRENCHING FEATURE STYLE | HEXAGON |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | 0.811 INCHES NOMINAL |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | 0.740 INCHES NOMINAL |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | 0.811 INCHES NOMINAL |
| BBKP | FOURTH DIAMETER FROM WRENCHING FEATURE | 0.660 INCHES NOMINAL |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.377 INCHES NOMINAL |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 0.826 INCHES NOMINAL |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | 1.209 INCHES NOMINAL |
| BBKW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | 1.386 INCHES NOMINAL |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | 0.300 INCHES NOMINAL |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 1.826 INCHES NOMINAL |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 2.460 INCHES NOMINAL |
| BBLF | WRENCHING FEATURE HEIGHT | 0.437 INCHES NOMINAL |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 16 |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNJF |
| CQPR | FIRST END SEAT ANGLE | 12.0 DEGREES NOMINAL |
| CQYM | FIRST END NOMINAL THREAD SIZE | 0.750 INCHES |
| CRCN | SECOND END SEAT ANGLE | 12.0 DEGREES NOMINAL |
| CRMX | SECOND END THREAD QUANTITY PER INCH | 14 |
| CRNB | SECOND END NOMINAL THREAD SIZE | 0.875 INCHES |
| CRPF | SECOND END THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | ALUMINUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-268,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | ANODIZE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
