Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 71292-01, a San Antonio Air Logistics Center item with the NSN 5340006140018 that is listed alongside the description “Bracket Double Angle.” If you are interested in part number 71292-01 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 71292-01 is specifically listed with the NSN 5340-00-614-0018, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to San Antonio Air Logistics Center, this NSN part was specifically produced under CAGE Code 98750. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-614-0018 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 006140018 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 71292-01 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD | MACHINED |
| ADLK | FIRST LEG LENGTH | 0.650 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 0.810 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 1.180 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.170 INCHES MINIMUM AND 0.176 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.144 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.870 INCHES NOMINAL |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.375 NOMINAL INCHES |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.160 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.150 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| AHPZ | CENTER SECTION HEIGHT | 0.380 INCHES NOMINAL |
| AHQA | CENTER SECTION WIDTH | 1.180 INCHES NOMINAL |
| AHQB | CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 1.180 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.812 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.180 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.180 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
