Request a Quote for KDJ07A020-59 Sargent Aerospace Part With the NSN 3120-01-144-3961 Today

Part Number: KDJ07A020-59

Alternate P/N: KDJ07A02059

Manufacturer: Sargent Aerospace

NSN: 3120-01-144-3961

NIIN: 011443961

Item Name : Bearing Sleeve

CAGE Code: 97613

FSC: 3120 Bearings Plain Unmounted

FSG: 31 Bearings

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number KDJ07A020-59, a Sargent Aerospace item with the NSN 3120011443961 that is listed alongside the description “Bearing Sleeve.” If you are interested in part number KDJ07A020-59 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number KDJ07A020-59 is specifically listed with the NSN 3120-01-144-3961, and this code can be used to determine that it falls under FSC 3120 Bearings Plain Unmounted. Additionally, while tracing back to Sargent Aerospace, this NSN part was specifically produced under CAGE Code 97613. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number KDJ07A020-59 with NSN 3120-01-144-3961, 3120011443961

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-144-3961 Item Description: BEARING,SLEEVE	3120	011443961		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC

Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
KDJ07A020-59	5	2	3

Characteristics Data of NSN 3120-01-144-3961, 3120011443961

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	0.2520 INCHES MINIMUM AND 0.2670 INCHES MAXIMUM"
ADAR	BODY OUTSIDE DIAMETER	0.5633 INCHES MINIMUM AND 0.5638 INCHES MAXIMUM"
ADAS	BODY INSIDE DIAMETER	0.4380 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM"
AEPR	FLANGE OUTSIDE DIAMETER	0.6770 INCHES MINIMUM AND 0.6970 INCHES MAXIMUM"
AGFF	FLANGE WIDTH	0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM"
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER"
BZLX	CORNER SHAPE	SQUARE INSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER"
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER"
CSYM	SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY"
MATT	MATERIAL	ALUMINUM ALLOY 2024 OUTER LAYER"
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER"
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE LEFT END SURFACE OF BODY AND FLANGE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INNER LAYER AND MIL-B-81934/2 MIL SPEC SINGLE MATERIAL RESPONSE INNER LAYER"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE AND MIL-B-81934/2 MIL SPEC SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6,COND T851 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER OR QQ-A-200/3,COND T8511 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER"
SFTT	SURFACE TREATMENT	ANODIZE OUTER LAYER OR CHROMATE OUTER LAYER"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OUTER LAYER OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OUTER LAYER"
STYL	STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END"
ZZZK	SPECIFICATION/STANDARD DATA	81755-C7505 MANUFACTURERS STANDARD"
ABHP	OVERALL LENGTH	0.2520 INCHES MINIMUM AND 0.2670 INCHES MAXIMUM"
ADAR	BODY OUTSIDE DIAMETER	0.5633 INCHES MINIMUM AND 0.5638 INCHES MAXIMUM"
ADAS	BODY INSIDE DIAMETER	0.4380 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM"
AEPR	FLANGE OUTSIDE DIAMETER	0.6770 INCHES MINIMUM AND 0.6970 INCHES MAXIMUM"
AGFF	FLANGE WIDTH	0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM"
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER"
BZLX	CORNER SHAPE	SQUARE INSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER"
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER"
CSYM	SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY"
MATT	MATERIAL	ALUMINUM ALLOY 2024 OUTER LAYER"
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER"
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE LEFT END SURFACE OF BODY AND FLANGE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INNER LAYER AND MIL-B-81934/2 MIL SPEC SINGLE MATERIAL RESPONSE INNER LAYER"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE AND MIL-B-81934/2 MIL SPEC SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6,COND T851 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER OR QQ-A-200/3,COND T8511 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER"
SFTT	SURFACE TREATMENT	ANODIZE OUTER LAYER OR CHROMATE OUTER LAYER"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OUTER LAYER OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OUTER LAYER"
STYL	STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END"
ZZZK	SPECIFICATION/STANDARD DATA	81755-C7505 MANUFACTURERS STANDARD"