Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 32A1-1195, a Servo Instrument Corporation item with the NSN 5905000686013 that is listed alongside the description “Resistor Variable Wire Wound Pre.” If you are interested in part number 32A1-1195 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 32A1-1195 is specifically listed with the NSN 5905-00-068-6013, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Servo Instrument Corporation, this NSN part was specifically produced under CAGE Code 19176. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-00-068-6013 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 000686013 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
300-8190 | C | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 1 |
AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
AAVL | PILOT DIAMETER | 1.8750 INCHES NOMINAL |
AAVM | PILOT LENGTH | 0.0600 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM |
ABHP | OVERALL LENGTH | 2.000 INCHES NOMINAL |
ABPA | UNDERCUT DIAMETER | 1.875 INCHES NOMINAL |
ABPC | UNDERCUT WIDTH | 0.0600 INCHES NOMINAL |
ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
ADAQ | BODY LENGTH | 1.250 INCHES MAXIMUM |
ADAV | OVERALL DIAMETER | 2.000 INCHES NOMINAL |
AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
AEDA | MOUNTING LIP DEPTH | 0.0600 INCHES NOMINAL |
AEDX | SHAFT STYLE | ROUND |
AEDZ | SHAFT BEARING TYPE | BALL |
AEFD | ACTUATOR TYPE | SINGLE SHAFT |
AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
AEFL | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
AEFM | MAXIMUM STOP TORQUE | 4.00 INCH-OUNCES |
AEFY | SHAFT END PLAY | 0.003 INCHES |
AEFZ | SHAFT RUNOUT | 0.001 INCHES |
AEGA | LATERAL RUNOUT | 0.002 INCHES |
AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.2 |
APXH | TERMINAL LOCATION | UPPER ADJACENT SIDE TWO ROWS |
AXGY | MOUNTING METHOD | CLAMP RING |
CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/0.10 SINGLE SECTION |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
FEAT | SPECIAL FEATURES | A W/TWO WINGRESISTORS ONE EA END OF RESISTOR ELEMENT |
TEST | TEST DATA DOCUMENT | 81413-170205-000 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
TTQY | TERMINAL TYPE AND QUANTITY | 5 SOLDER STUD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote