Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 914107-1, a Smith S R Co Inc item with the NSN 5905012917663 that is listed alongside the description “Resistor Variable Wire Wound Non.” If you are interested in part number 914107-1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 914107-1 is specifically listed with the NSN 5905-01-291-7663, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Smith S R Co Inc, this NSN part was specifically produced under CAGE Code 06841. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-291-7663 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 012917663 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 60885 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABNB | FIRST FLAT LENGTH | 0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| ABNC | FLAT HEIGHT | 0.188 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 3.000 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.125 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 6.281 INCHES MINIMUM AND 6.344 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,FLATTED |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 295.0 MINIMUM AND 305.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 64.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 40.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 240.00 INCH-OUNCES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL AND 0.164 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF AND UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | STANDARD BUSHING AND THREADED HOLE |
| CBBL | FEATURES PROVIDED | PANEL SEAL |
| CBME | CUBIC MEASURE | 45.400 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 KILOHMS 2ND SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 KILOHMS 3RD SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 45.0 OHMS 1ST SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 MINIMUM AND 305.0 MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 340.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 25.0 FREE AIR 2ND SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 25.0 FREE AIR 3RD SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 50.0 FREE AIR 1ST SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | THREE VARIABLES MOUNTED IN STEEL BRACKET |
| TEST | TEST DATA DOCUMENT | 06481-914107 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 9 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
