Request a Quote for AS81935 2 Society Of Automotive Engineers Inc Part With the NSN 3120-01-407-5724 Today

Part Number: AS81935 2

Alternate P/N: AS819352

Manufacturer: Society Of Automotive Engineers Inc

NSN: 3120-01-407-5724

NIIN: 014075724

Item Name : Bearing Plain Rod End

CAGE Code: 81343

FSC: 3120 Bearings Plain Unmounted

FSG: 31 Bearings

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number AS81935 2, a Society Of Automotive Engineers Inc item with the NSN 3120014075724 that is listed alongside the description “Bearing Plain Rod End.” If you are interested in part number AS81935 2 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number AS81935 2 is specifically listed with the NSN 3120-01-407-5724, and this code can be used to determine that it falls under FSC 3120 Bearings Plain Unmounted. Additionally, while tracing back to Society Of Automotive Engineers Inc, this NSN part was specifically produced under CAGE Code 81343. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number AS81935 2 with NSN 3120-01-407-5724, 3120014075724

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-407-5724 Item PartTypeName: BEARING,PLAIN,ROD END	3120	014075724	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
AS81935/2	1	9	D

Characteristics Data of NSN 3120-01-407-5724, 3120014075724

MRC	Criteria	Characteristic
CQFM	Hardness Rating	55.0 ROCKWELL C MINIMUM INNER MEMBER AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
CQFM	Hardness Rating	28.0 ROCKWELL C MINIMUM OUTER RING AND 37.0 ROCKWELL C MAXIMUM OUTER RING
CQFM	Hardness Rating	39.0 ROCKWELL C MINIMUM ROD END BODY AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
ABXV	Bore Diameter	0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
AGGH	Outer Member Width	0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM
AGGY	Shank Thread Length	0.7500 INCHES NOMINAL
AGKP	Static Radial Load Rating	2360 POUNDS
AWDP	Thread Diameter	0.312 INCHES NOMINAL
AGGF	Outer Member Outside Diameter	0.7960 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM
AGGG	Bore Center To Shank End Distance	1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM
AGHA	Inspection Hole Center To End Distance	0.3550 INCHES MINIMUM AND 0.3950 INCHES MAXIMUM
AGHB	Shank Width Across Wrench Flats	0.4270 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM
ABHP	Overall Length	1.7780 INCHES NOMINAL
MDCL	Material Document And Classification	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT
MATT	Material	STEEL COMP 630 RACE INSERT
STDC	Surface Treatment Document And Classification	QQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
MRC	Decoded Requirement	Clear Text Reply
AAJD	Thread Class	3B
THSD	Thread Series Designator	UNJF
STYL	Style Designator	BALL TYPE
MDCL	Material Document And Classification	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
MATT	Material	STEEL COMP 440C INNER MEMBER
MATT	Material	STEEL COMP E4340 ROD END BODY
AAJF	Thread Direction	RIGHT-HAND
FEAT	Special Features	KEYWAY IN SHANK; SURFACE FINISH ON BALL PASSIVATE PER MIL-S-5002 OPTIONAL
AGGJ	Inner Member Width	0.4350 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
CMLP	Thread Quantity Per Inch	24
SFTT	Surface Treatment	CADMIUM ROD END BODY AND CHROMATE ROD END BODY
AAZF	Shank Style	INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE
MATT	Material	PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
ZZZK	Specification/Standard Data	81349-MIL-B-81935 GOVERNMENT SPECIFICATION
MDCL	Material Document And Classification	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER