Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 25101-1, a Solar Turbines Incorporated item with the NSN 3020009620183 that is listed alongside the description “Gear Spur.” If you are interested in part number 25101-1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 25101-1 is specifically listed with the NSN 3020-00-962-0183, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Solar Turbines Incorporated, this NSN part was specifically produced under CAGE Code 66195. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-962-0183 Item PartTypeName: GEAR,SPUR | 3020 | 009620183 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 25101-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 5.1250 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 82 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 5.250 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.728 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.416 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.250 INCHES |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 2 STEPS FIRST END |
| CWWH | END NOMINAL LENGTH | 0.480 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.686 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.938 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.984 INCHES SECOND END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.250 INCHES SECOND END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.480 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.984 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 1.110 INCHES SECOND END |
| CWXG | SECOND STEP NOMINAL LENGTH | 0.250 INCHES FIRST END |
| CWXL | SECOND STEP NOMINAL DIAMETER | 1.111 INCHES FIRST END |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
