Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 905591, a Spalla Inc item with the NSN 2520006266597 that is listed alongside the description “Shaft Axle Automotive.” If you are interested in part number 905591 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 905591 is specifically listed with the NSN 2520-00-626-6597, and this code can be used to determine that it falls under FSC 2520 Vehicle Power Transmission Components. Additionally, while tracing back to Spalla Inc, this NSN part was specifically produced under CAGE Code 22852. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-626-6597 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 006266597 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 905591 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUB | HOLE DIAMETER | 0.438 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 26.531 INCHES MINIMUM AND 26.656 INCHES MAXIMUM |
| ABUJ | THREAD SIZE | 3/8-16 |
| AETC | METALLIC HARDNESS RATING | 25.0 MINIMUM ROCKWELL C AND 60.0 MAXIMUM ROCKWELL C |
| AHTC | FLANGE OUTSIDE DIAMETER | 4.745 INCHES MINIMUM AND 4.750 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AMGA | SECOND END SPLINE LENGTH | 1.350 INCHES MINIMUM AND 1.352 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.136 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE AND 6 UNTHREADED HOLE |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTQ | SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTR | SECOND END FACILITY WIDTH | 0.250 INCHES NOMINAL |
| BNTS | SECOND END FACILITY LOCATION | LOCATED AT SHAFT END |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYS | FLANGE OVERALL THICKNESS | 0.812 INCHES NOMINAL |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | 1-1/4 IN. DIA OF PORTION OF SHAFT BETWEEN FLANGE AND SPLINE END |
| MATT | MATERIAL | STEEL COMP 4063 OR STEEL COMP 1045 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624,FS4063-CANCELED FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-633,FS1045-CANCELED FED SPEC 2ND MATERIAL RESPONSE |
| ZZZV | FSC APPLICATION DATA | CONTROLLED DIFFERENTIAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
