Request a Quote for 454350 Spartan Aerospace Llc Part With the NSN 5340-01-162-0792 Today

Part Number: 454350

Manufacturer: Spartan Aerospace Llc

NSN: 5340-01-162-0792

NIIN: 011620792

Item Name : Bracket Angle

CAGE Code: 33615

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 454350, a Spartan Aerospace Llc item with the NSN 5340011620792 that is listed alongside the description “Bracket Angle.” If you are interested in part number 454350 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 454350 is specifically listed with the NSN 5340-01-162-0792, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Spartan Aerospace Llc, this NSN part was specifically produced under CAGE Code 33615. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 454350 with NSN 5340-01-162-0792, 5340011620792

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-162-0792 Item PartTypeName: BRACKET,ANGLE	5340	011620792	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
454350	5	2	3

Characteristics Data of NSN 5340-01-162-0792, 5340011620792

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.750 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	1.000 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	TF33 PW102 ENGINE,KC-135
AHLF	SECOND LEG WIDTH	0.625 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
AHLN	SECOND LEG HOLE DIAMETER	0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.312 INCHES NOMINAL
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.300 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
AHPX	SECOND LEG THICKNESS	0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
AHQN	FIRST LEG WIDTH	0.625 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.312 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.250 INCHES NOMINAL
AJFP	FIRST LEG END RADIUS	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
AJFQ	SECOND LEG END RADIUS	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
AJZU	FIRST LEG STYLE	END RADIUS
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE
AKBU	SECOND LEG STYLE	END RADIUS
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
MATT	MATERIAL	STEEL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	ANGLE