Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number HT4072-3-7-5, a Sps Technologies Inc item with the NSN 5305016268204 that is listed alongside the description “Screw Close Tolerance.” If you are interested in part number HT4072-3-7-5 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number HT4072-3-7-5 is specifically listed with the NSN 5305-01-626-8204, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to Sps Technologies Inc, this NSN part was specifically produced under CAGE Code 80539. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-626-8204 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 016268204 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT4072-3-7-5 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MATT | Material | STEEL COMP XM-13 OVERALL |
| AHYM | Nominal Thread Diameter | 0.1900 INCHES |
| AASK | Head Style | OVAL COUNTERSUNK UNDERCUT |
| AASA | Thread Length | 0.312 INCHES NOMINAL |
| AASB | Fastener Length | 0.750 INCHES NOMINAL |
| AASL | Head Diameter | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| CXCY | Part Name Assigned By Controlling Agency | SCREW, MACHINE, 100 DEG C'SUNK, HI-TORQUE, REDUCED HEAD |
| AGAV | End Item Identification | F-15SA |
| SFTT | Surface Treatment | ALUMINUM OVERALL |
| AAWB | Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM OVERALL |
| STDC | Surface Treatment Document And Classification | MIL-C-83488, TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABQZ | Internal Drive Style | HIGH-TORQUE |
| CMLP | Thread Quantity Per Inch | 32 |
| THSD | Thread Series Designator | UNJF |
| AAJF | Thread Direction | RIGHT-HAND |
| MDCL | Material Document And Classification | AMS 5629 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ANEE | Grip Length | 0.438 INCHES NOMINAL |
| AASU | Head Height | 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 0.629 INCHES MINIMUM AND 0.639 INCHES MAXIMUM OVERALL |
| AAUR | Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MRC | Decoded Requirement | Clear Text Reply |
| AAJD | Thread Class | 3A |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
