Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number HT4069-5-11A, a Sps Technologies Inc item with the NSN 5305016272954 that is listed alongside the description “Screw Close Tolerance.” If you are interested in part number HT4069-5-11A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number HT4069-5-11A is specifically listed with the NSN 5305-01-627-2954, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to Sps Technologies Inc, this NSN part was specifically produced under CAGE Code 56878. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-627-2954 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 016272954 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT4069-5-11A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.531 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.219 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.429 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.071 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| AAUY | POINT LENGTH | 0.052 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM THREADS |
| ABQJ | POINT STYLE | FLAT |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AGAV | III END ITEM IDENTIFICATION | F-15SA |
| AHYM | NOMINAL THREAD DIAMETER | 0.3125 INCHES |
| ANEE | GRIP LENGTH | 0.688 INCHES NOMINAL |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CBBL | FEATURES PROVIDED | CETYL ALCOHOL LUBRICANT |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.095 INCHES MINIMUM AND 1.105 INCHES MAXIMUM THREADS |
| CWDK | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW-CLOSE TOLERANCE, 100 DEG C'SUNK, HI-TORQUE, REDUCED HEAD |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 TYPE II CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
