Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 104D108-2, a Stewart And Stevenson Power Inc item with the NSN 4720010684684 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number 104D108-2 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 104D108-2 is specifically listed with the NSN 4720-01-068-4684, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Stewart And Stevenson Power Inc, this NSN part was specifically produced under CAGE Code 81381. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-068-4684 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 010684684 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FB8761 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 2.375 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKG | BOLT CIRCLE DIAMETER | 4.438 INCHES NOMINAL 2ND END |
| ABKG | BOLT CIRCLE DIAMETER | 5.000 INCHES NOMINAL 1ST END |
| ABKU | FLANGE THICKNESS | 0.500 INCHES NOMINAL 1ST END |
| ABKU | FLANGE THICKNESS | 0.500 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 2.875 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 24.000 INCHES |
| ADJS | EXTERIOR COLOR | BLACK |
| AECS | BOLT HOLE QUANTITY | 6 1ST END |
| AECS | BOLT HOLE QUANTITY | 6 2ND END |
| AEPR | FLANGE OUTSIDE DIAMETER | 6.125 INCHES NOMINAL 1ST END |
| AEPR | FLANGE OUTSIDE DIAMETER | 6.125 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 1ST END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.562 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.562 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM 1ST END |
| AJED | RAISED FACE HEIGHT | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM 2ND END |
| AJEE | RAISED FACE DIAMETER | 3.281 INCHES NOMINAL 1ST END |
| AJEE | RAISED FACE DIAMETER | 3.281 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| CQBD | BURST TEST PRESSURE | 1400.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 350.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 700.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 40.812 INCHES NOMINAL WORKING |
| CTCJ | FLANGE STYLE | ROUND W / BOLT HOLES 1ST END |
| CTCJ | FLANGE STYLE | ROUND W / BOLT HOLES 2ND END |
| FEAT | SPECIAL FEATURES | 90.0 DEG HOSE ELBOW LOCATED 20.500 IN.FROM FIRST END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON AND WATER,FRESH AND WATER,SALT SINGLE RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
