Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 290-508-01, a Sunbelt Design And Development Inc item with the NSN 5315015078124 that is listed alongside the description “Pin Straight Headless.” If you are interested in part number 290-508-01 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 290-508-01 is specifically listed with the NSN 5315-01-507-8124, and this code can be used to determine that it falls under FSC 5315 Nails Machine Keys and Pins. Additionally, while tracing back to Sunbelt Design And Development Inc, this NSN part was specifically produced under CAGE Code 0FC01. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-01-507-8124 Item PartTypeName: PIN,STRAIGHT,HEADLESS | 5315 | 015078124 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
290-508-01 | 5 | 9 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CHAMFERED |
ABRB | HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
ABRC | FIRST HOLE DIAMETER | 0.100 INCHES NOMINAL |
ABRD | SECOND HOLE DIAMETER | 0.100 INCHES NOMINAL |
ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES NOMINAL |
ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.600 INCHES NOMINAL |
ACHT | PIN OVERALL LENGTH | 5.000 INCHES NOMINAL |
ACHU | PIN OVERALL DIAMETER | 0.7500 INCHES NOMINAL |
AGAV | END ITEM IDENTIFICATION | NSN 1730-00-773-8591 |
AMCS | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
AMFM | SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
CTHC | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, TOWBAR |
MATT | MATERIAL | STEEL COMP 303 OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A967 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
AAGZ | FIRST END STYLE | CHAMFERED |
ABRB | HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
ABRC | FIRST HOLE DIAMETER | 0.100 INCHES NOMINAL |
ABRD | SECOND HOLE DIAMETER | 0.100 INCHES NOMINAL |
ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES NOMINAL |
ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.600 INCHES NOMINAL |
ACHT | PIN OVERALL LENGTH | 5.000 INCHES NOMINAL |
ACHU | PIN OVERALL DIAMETER | 0.7500 INCHES NOMINAL |
AGAV | END ITEM IDENTIFICATION | NSN 1730-00-773-8591 |
AMCS | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
AMFM | SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
CTHC | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, TOWBAR |
MATT | MATERIAL | STEEL COMP 303 OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A967 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote