Request a Quote for 9M702-2B10 Swan Industries Inc Part With the NSN 5340-01-501-9129 Today

Part Number: 9M702-2B10

Alternate P/N: 9M7022B10

Manufacturer: Swan Industries Inc

NSN: 5340-01-501-9129

NIIN: 015019129

Item Name : Clamp Block Section

CAGE Code: 54112

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 9M702-2B10, a Swan Industries Inc item with the NSN 5340015019129 that is listed alongside the description “Clamp Block Section.” If you are interested in part number 9M702-2B10 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 9M702-2B10 is specifically listed with the NSN 5340-01-501-9129, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Swan Industries Inc, this NSN part was specifically produced under CAGE Code 54112. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 9M702-2B10 with NSN 5340-01-501-9129, 5340015019129

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-501-9129 Item PartTypeName: CLAMP,BLOCK,SECTION	5340	015019129	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
9M702-2B10	5	2	3

Characteristics Data of NSN 5340-01-501-9129, 5340015019129

MRC	Criteria	Characteristic
STYL	Style Designator	RECTANGULAR
CWWM	Clamping Hole Diameter	0.258 INCHES MINIMUM FIRST HOLE AND 0.274 INCHES MAXIMUM FIRST HOLE
CWXC	Distance From End To First Mounting Hole Center	0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM
CWXZ	Center To Center Distance Between First And Second Clamping Holes	0.614 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
CWWM	Clamping Hole Diameter	0.382 INCHES MINIMUM SECOND HOLE AND 0.398 INCHES MAXIMUM SECOND HOLE
CWWM	Clamping Hole Diameter	0.382 INCHES MINIMUM THIRD HOLE AND 0.398 INCHES MAXIMUM THIRD HOLE
CWYC	Center To Center Distance Between First And Third Clamping Holes	1.301 INCHES MINIMUM AND 1.321 INCHES MAXIMUM
MATT	Material	PLASTIC
ABMK	Overall Width	0.384 INCHES MINIMUM AND 0.404 INCHES MAXIMUM
ABHP	Overall Length	1.864 INCHES MINIMUM AND 1.884 INCHES MAXIMUM
AXPC	Center To Center Distance Between First And Second Mounting Holes	0.614 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
ABTB	Mounting Hole Diameter	0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
ABTJ	Mounting Hole Quantity	2
AFEC	Distance From Center Of Mounting Hole To Edge Along The Width	0.197 INCHES NOMINAL
BYGG	Block Height	0.384 INCHES MINIMUM AND 0.404 INCHES MAXIMUM
CWTD	Clamping Hole Quantity	3
CWXN	Distance From End To First Clamping Hole Center	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
AZGM	Mounting Facility	UNTHREADED HOLE
MRC	Decoded Requirement	Clear Text Reply