Request a Quote for CGH-10-AS-7 Teledyne Controls Llc Part With the NSN 5990-00-617-1105 Today

Part Number: CGH-10-AS-7

Alternate P/N: CGH10AS7

Manufacturer: Teledyne Controls Llc

NSN: 5990-00-617-1105

NIIN: 006171105

Item Name : Synchro Transmitter

CAGE Code: 98571

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number CGH-10-AS-7, a Teledyne Controls Llc item with the NSN 5990006171105 that is listed alongside the description “Synchro Transmitter.” If you are interested in part number CGH-10-AS-7 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number CGH-10-AS-7 is specifically listed with the NSN 5990-00-617-1105, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Teledyne Controls Llc, this NSN part was specifically produced under CAGE Code 98571. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number CGH-10-AS-7 with NSN 5990-00-617-1105, 5990006171105

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-617-1105 Item PartTypeName: SYNCHRO,TRANSMITTER	5990	006171105	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
67C1822	1	2	3

Characteristics Data of NSN 5990-00-617-1105, 5990006171105

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
ABHP	OVERALL LENGTH	1.6160 INCHES NOMINAL
ABKK	FLANGE DIAMETER	0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0630 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.8400 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.3750 INCHES NOMINAL SINGLE SHAFT
AJSL	BODY SIZE	10
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	26.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	90.0 MILLIAMPERES NOMINAL
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	440.0 MILLIWATTS NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	54.00 NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	13.00 NOMINAL
AJTA	ZRS RESISTANCE IN OHMS	80.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	33.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	11.60 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	6.500 INPUT TO OUTPUT NOMINAL
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	30.00
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-6.0 TO 6.0
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	16.0 CENTIMETER-GRAMS MAXIMUM
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	4.0 CENTIMETER-GRAMS MAXIMUM
AJVW	ALIGNMENT HOLE QUANTITY	3
AJWQ	PILOT LENGTH	0.0380 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.0620 INCHES NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.2410 INCHES MAXIMUM
CQRG	BODY MATERIAL	STEEL CORROSION RESISTING
CQTM	TERMINAL LOCATION	REAR
CQXQ	PLUS J ZRO REACTANCE IN OHMS	285.00 NOMINAL
CQZS	SHAFT SLOT DEPTH	0.0300 INCHES NOMINAL SINGLE SHAFT
CRGZ	PLUS J ZSO REACTANCE IN OHMS	50.00 NOMINAL
CRHN	SHAFT SLOT WIDTH	0.0200 INCHES NOMINAL SINGLE SHAFT
CRKL	PLUS J ZRS REACTANCE IN OHMS	26.00 NOMINAL
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CRSY	ALIGNMENT HOLE DEPTH	0.0500 INCHES MAXIMUM
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.6780 INCHES NOMINAL
TTQY	TERMINAL TYPE AND QUANTITY	5 WIRE LEAD