Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 482754, a Terex American Crane Corp item with the NSN 4720009626549 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number 482754 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 482754 is specifically listed with the NSN 4720-00-962-6549, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Terex American Crane Corp, this NSN part was specifically produced under CAGE Code 49185. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-962-6549 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 009626549 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 482754 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| ABJH | TEMP RATING | -25.0 DEG FAHRENHEIT AND 150.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.560 INCHES NOMINAL 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.180 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AFQN | FLANGE LENGTH | 3.120 INCHES NOMINAL 1ST END |
| AGFF | FLANGE WIDTH | 2.874 INCHES NOMINAL 1ST END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL W/ GASKET GROOVE 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END |
| AJED | RAISED FACE HEIGHT | 0.020 INCHES NOMINAL 1ST END |
| AJEE | RAISED FACE DIAMETER | 2.000 INCHES NOMINAL 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| CBBL | FEATURES PROVIDED | SELF-SEALING |
| CQBD | BURST TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| CQGM | MAXIMUM OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 190.000 INCHES MINIMUM WORKING AND 194.000 INCHES MAXIMUM WORKING |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| FEAT | SPECIAL FEATURES | LONG TANGENT STYLE ELBOW ON ONE END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
