Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 4WS6M12-S22, a Thern Inc item with the NSN 3950014635229 that is listed alongside the description “Winch Drum Power Operated.” If you are interested in part number 4WS6M12-S22 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 4WS6M12-S22 is specifically listed with the NSN 3950-01-463-5229, and this code can be used to determine that it falls under FSC 3950 Winches Hoists Cranes and Derricks. Additionally, while tracing back to Thern Inc, this NSN part was specifically produced under CAGE Code 12437. With our services and dedication to simple procurement in mind, get started with us today!
MRC | Criteria | Characteristic |
---|---|---|
ATYG | POWER REQUIREMENT RATING | 5.00 HORSEPOWER |
FEAT | SPECIAL FEATURES | WORM/SPUR GEAR DRIVE;460-3-60 CYCLE INPUT VOLTAGE;3 HP TEFC BRAKE MOTOR WITH IEEE 45 MARINE DUTY RATING;BRAKE IS DUST TIGHT WATER PROOF;ELECTRA GEAR REDUCER;TOTAL REDUCTION RATIO W/SPUR GEAR 228.50;LOAD RATING 3,500 LBS 1ST LAYER,3000 MID DRUM, 2600 LBS FULL DRUM;NOMINAL LINE SPEED 19 FPM 1ST LAYER,22 FPM MID DRUM,25 FPM FULL DRUM;GROOVE FOR .5 IN DIA CABLE DEVELOPS APPROX 1.75 GROOVES PER IN OF DRUM;ONE REVOLUTION OF DRUM WRAPS APPROX 2.4 FT OF CABLE;ROLLER EXERTS PRESSURE ON CABLE AS IT WINDS ON/OFF DRUM AIDS IN KEEPING CABLE FROM JUMPING GROOVES WITH NO LOAD ON CABLE;ROLLER RECEIVES FORCE FROM GAS SPRINGS |
AKNA | INCLOSURE TYPE | PARTIALLY INCLOSED |
ACDC | CURRENT TYPE | AC |
AKPS | DUTY CYCLE | INTERMITTENT |
FAAZ | PHASE | THREE |
ELEC | VOLTAGE IN VOLTS | 460.0 |
ATWD | DRUM FLANGE TO FLANGE DISTANCE AND LOCATION | 12.000 INCHES NOMINAL FIRST DRUM |
ATWE | DRUM DIAMETER AND LOCATION | 9.000 INCHES NOMINAL FIRST DRUM |
AGAV | III END ITEM IDENTIFICATION | WINCH;W/S NIMITZ CLASS CVN |
ATYH | DRUM SURFACE DESIGN | GROOVED |
AKDJ | PRIME MOVER TYPE | ELECTRIC MOTOR |
ADZC | ENVIRONMENTAL PROTECTION | ANY ACCEPTABLE |
BFMF | COOLING METHOD | ANY ACCEPTABLE |
AAXH | PRIME MOVER QUANTITY | 1 |
FREQ | FREQUENCY IN HERTZ | 60.0 |
SUPP | III SUPPLEMENTARY FEATURES | MAGNETIC REVERSING STARTER MOUNTED AND WIRED TO WINCH;STARTER INCLUDES CONTACTS FOR FORWARD/REVERSING MOTOR,THERMAL OVERLOADS W/ ADJUSTABLE SETTING FM 4.00-6.00 AMPS,CONTROL POWER TRANSFORMER TO REDUCE 460 V PRIMARY TO 120V AT OP STATION;ELECTRONIC OVERLOAD SENSOR INCLUDED WHICH CUTS CURRENT TO MOTOR WHEN CURRENT EXCEEDS PRESET MAX;SWITCH IS CURRENT ACTIVATED,ADJUSTABLE,RESETTING BY REVERSING DIRECTION OF OP;SENSOR ACTIVE IN FORWARD ONLY;WILL NOT SENSE REDUCED CURRENT;STARTER SOES NOT INCLUDE PLUGS TO POWER SOURCE;OP STATION IS NEMA 4 PUSHBUTTON STATION ON 12 PT PENDANT WITH UP/DOWN LEGENDS |
APHE | OPERATION METHOD | POWERED |
ATWF | DRUM FLANGE DIAMETER AND LOCATION | 14.000 INCHES NOMINAL FIRST DRUM |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote