Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number RA3M5, a Timken Corporation item with the NSN 3110007266244 that is listed alongside the description “Bearing Ball Rod End.” If you are interested in part number RA3M5 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number RA3M5 is specifically listed with the NSN 3110-00-726-6244, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Timken Corporation, this NSN part was specifically produced under CAGE Code 21335. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-00-726-6244 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 007266244 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
NAS659-3-5 | 6 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AAZE | SHANK DIAMETER | 0.3125 INCHES NOMINAL |
AAZF | SHANK STYLE | EXTERNALLY THREADED |
ABHP | OVERALL LENGTH | 2.3435 INCHES MAXIMUM |
ABXV | BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 0.7810 INCHES NOMINAL |
AGGY | SHANK THREAD LENGTH | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
AGVT | OUTER RING WIDTH | 0.4360 INCHES NOMINAL |
AGVU | INNER RING WIDTH | 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM |
AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.9280 INCHES MINIMUM AND 1.9480 INCHES MAXIMUM |
AGYJ | SEAL QUANTITY | 2 |
AGYW | BEARING SEAL TYPE | CONTACT |
AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
FEAT | SPECIAL FEATURES | 0.0620 IN. W BY 0.0500 IN. DEEP BY 1.3750 IN. LG SLOT IN SHANK |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | STEEL BALL |
MATT | MATERIAL | STEEL OUTER RING |
MATT | MATERIAL | STEEL SHAFT |
SFTT | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
THSD | THREAD SERIES DESIGNATOR | UNF |
MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
MATT | MATERIAL | STEEL INNER RING |
STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
TEST | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN |
AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
CMLP | THREAD QUANTITY PER INCH | 24 |
CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
LBMA | LUBRICATION MATERIAL | GREASE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote