Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number BACB10AE10A, a Timken Corporation item with the NSN 3110010539866 that is listed alongside the description “Bearing Ball Rod End.” If you are interested in part number BACB10AE10A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number BACB10AE10A is specifically listed with the NSN 3110-01-053-9866, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Timken Corporation, this NSN part was specifically produced under CAGE Code 21335. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-01-053-9866 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 010539866 | T | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
HHRE-4-H-8-1 | 6 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAZE | SHANK DIAMETER | 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
AAZF | SHANK STYLE | HOLLOW |
ABHP | OVERALL LENGTH | 2.0940 INCHES NOMINAL |
ABXV | BORE DIAMETER | 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM |
AGVT | OUTER RING WIDTH | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
AGVU | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.6150 INCHES MINIMUM AND 1.6350 INCHES MAXIMUM |
AGXJ | SHANK BORE DIAMETER | 0.5150 INCHES NOMINAL |
AGXK | SHANK BORE DEPTH | 0.8440 INCHES MINIMUM AND 0.9060 INCHES MAXIMUM |
AGYJ | SEAL QUANTITY | 2 |
AGYW | BEARING SEAL TYPE | CONTACT |
AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
FEAT | SPECIAL FEATURES | 80 PCT MIN FULL SPECIFIED LUBRICANT,SHANK FULL OF PUTTY 3119 FSCM 04622 |
LBMA | LUBRICATION MATERIAL | GREASE |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL |
MATT | MATERIAL | STEEL COMP 302 OR STEEL COMP 301 RETAINER |
MATT | MATERIAL | STEEL COMP 4620 OR STEEL COMP 4720 OR STEEL COMP 8620 OR STEEL COMP 4130 ROD END BODY |
MATT | MATERIAL | STEEL COMP E52100 BALL |
MATT | MATERIAL | STEEL COMP E52100 INNER RING |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5515 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE RETAINER |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-624 FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-624 FED SPEC 3RD MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 4TH MATERIAL RESPONSE ROD END BODY |
SFTT | SURFACE TREATMENT | CADMIUM ROD END BODY |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote