Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number KP10ASA2174, a Timken Corporation item with the NSN 3110012097397 that is listed alongside the description “Bearing Ball Airframe.” If you are interested in part number KP10ASA2174 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number KP10ASA2174 is specifically listed with the NSN 3110-01-209-7397, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Timken Corporation, this NSN part was specifically produced under CAGE Code 21335. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-209-7397 Item PartTypeName: BEARING,BALL,AIRFRAME | 3110 | 012097397 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| KP10ASA2174 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 0.6250 INCHES MINIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.5000 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | B-1B AIRCRAFT |
| AGVT | OUTER RING WIDTH | 0.3415 INCHES MINIMUM |
| AGVU | INNER RING WIDTH | 0.4035 INCHES MINIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZC | LOAD DIRECTION | RADIAL |
| AHAW | SELF-ALIGNMENT LOCATION | EXTERNAL |
| AKVV | INTERNAL CLEARANCE | 0.0010 INCHES MAXIMUM RADIAL |
| CBBL | FEATURES PROVIDED | ALIGNING RING |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS |
| FEAT | SPECIAL FEATURES | 20.0 PERCENT FULL OF SPECIFIED GREASE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-21164 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING ALIGNMENT RINGSTEEL CORROSION RESISTING BALL |
| MATT | MATERIAL | STEEL CORROSION RESISTING BALLSTEEL CORROSION RESISTING INNER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING INNER RINGSTEEL CORROSION RESISTING OUTER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING OUTER RINGPLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | SINGLE ROW,EXTERNAL SELF ALIGNING,W/ALIGNING RING |
| SUPP | SUPPLEMENTARY FEATURES | THE ACTUAL VENDOR CAGE CODE FOR SOURCE CONTROL DRAWING IS 78567 BUT THAT CAGE CODE IS OBSOLETE |
| ZZZK | SPECIFICATION/STANDARD DATA | 78567-NF203535 MANUFACTURERS SOURCE CONTROL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
