Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 9M726A1, a Trico Manufacturing Inc item with the NSN 5340012795807 that is listed alongside the description “Bracket Angle.” If you are interested in part number 9M726A1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 9M726A1 is specifically listed with the NSN 5340-01-279-5807, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Trico Manufacturing Inc, this NSN part was specifically produced under CAGE Code 59570. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-279-5807 Item PartTypeName: BRACKET,ANGLE | 5340 | 012795807 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9M726A1 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | 0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| AHLG | SECOND LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.1645 INCHES MINIMUM AND 0.1675 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| AHQP | FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.650 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 80.0 DEGREES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | PRIMER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
