Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number TG2645, a Trw Limited item with the NSN 3020002002107 that is listed alongside the description “Gear Helical.” If you are interested in part number TG2645 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number TG2645 is specifically listed with the NSN 3020-00-200-2107, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Trw Limited, this NSN part was specifically produced under CAGE Code 31033. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-200-2107 Item PartTypeName: GEAR,HELICAL | 3020 | 002002107 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| F400H401 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | SPOKED |
| AGJS | PITCH DIAMETER | 6.0240 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.216 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 37.1734 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.156 INCHES FIRST END |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.313 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 1.063 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.0003 INCHES FIRST END |
| CWSN | KEYWAY NOMINAL WIDTH | 0.1584 INCHES FIRST END |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.5953 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 1.875 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.2812 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.875 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.2812 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.0625 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TIMING MARK ON 1ST SIDE 170 DEG 26 MIN 51 SEC CCW FROM KEYWAY,TIMING MARK ON 2ND SIDE 116 DEG 34 MIN CCW FROM TIMING MARK ON 1ST SIDE,2 HOLES 5/32 IN. DIA,ONE LOCATED OVER KEYWAY,180 DEG APART |
| MATT | MATERIAL | IRON OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB,ONE RECESSED HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
