Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number TG2475, a Trw Limited item with the NSN 3020003772905 that is listed alongside the description “Gear Helical.” If you are interested in part number TG2475 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number TG2475 is specifically listed with the NSN 3020-00-377-2905, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Trw Limited, this NSN part was specifically produced under CAGE Code 31033. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-377-2905 Item PartTypeName: GEAR,HELICAL | 3020 | 003772905 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| H4765-2 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 9.7500 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 72 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CQFM | HARDNESS RATING | 31.0 ROCKWELL C MINIMUM OVERALL AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 6 PLAIN AXIALLY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.997 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 22.6198 DEGREES |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.218 INCHES BOTH ENDS |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.468 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 1.250 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.6250 INCHES BOTH ENDS |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.2187 INCHES SECOND END |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 4.250 INCHES SECOND END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 4.312 INCHES FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.374 INCHES AXIALLY THROUGH HUB,FIRST END |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 3.375 INCHES AXIALLY THROUGH HUB,FIRST END |
| FEAT | SPECIAL FEATURES | NFIG 1 ON END OF HUB ON CENTERLINE OF MTG HOLE,LETTER O LOCATED ON FACE OF GEAR AT ROOT OF TOOTH SPACE 65 DEG 44 MIN CW FROM FIG 1,DOUBLE CHISEL MARKS AT ROOT OF TWO TEETH SPACES 64 DEG 16 MIN CCW FROM FIG 1 MARK |
| MATT | MATERIAL | STEEL COMP 4340H OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI/SAE 4340H ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
