Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 450138, a Turbo Power And Marine System Inc item with the NSN 5340000209341 that is listed alongside the description “Bracket Angle.” If you are interested in part number 450138 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 450138 is specifically listed with the NSN 5340-00-020-9341, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Turbo Power And Marine System Inc, this NSN part was specifically produced under CAGE Code 11449. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-00-020-9341 Item PartTypeName: BRACKET,ANGLE | 5340 | 000209341 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
450138 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ADLK | FIRST LEG LENGTH | 1.000 INCHES NOMINAL |
ADLL | SECOND LEG LENGTH | 1.081 INCHES NOMINAL |
AHLF | SECOND LEG WIDTH | 1.655 INCHES NOMINAL |
AHLG | SECOND LEG CORNER RADIUS | 0.312 INCHES NOMINAL |
AHLK | FIRST LEG HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
AHLN | SECOND LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.031 INCHES NOMINAL |
AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.312 INCHES NOMINAL |
AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.312 INCHES NOMINAL |
AHPW | FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
AHPX | SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
AHQN | FIRST LEG WIDTH | 1.100 INCHES NOMINAL |
AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.347 INCHES NOMINAL |
AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
AJFP | FIRST LEG END RADIUS | 0.250 INCHES NOMINAL |
AJZU | FIRST LEG STYLE | END RADIUS AND TAPERED |
AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
AKBU | SECOND LEG STYLE | CORNER RADIUS |
AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
FEAT | SPECIAL FEATURES | THIS PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES,TOLERANCES,FIT RESTRICTIONS,MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM,DEATH OR SERIOUS INJURY |
MATT | MATERIAL | STEEL COMP 410 |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote