Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 361409, a United Technologies Corporation item with the NSN 5306008116104 that is listed alongside the description “Bolt Machine.” If you are interested in part number 361409 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 361409 is specifically listed with the NSN 5306-00-811-6104, and this code can be used to determine that it falls under FSC 5306 Bolts. Additionally, while tracing back to United Technologies Corporation, this NSN part was specifically produced under CAGE Code 77445. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-811-6104 Item PartTypeName: BOLT,MACHINE | 5306 | 008116104 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 361409 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASA | THREAD LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ASXK | HOLE QUANTITY | 4 |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | 0.1644 TO 0.1664 INCHES |
| CQBC | MINIMUM TENSILE STRENGTH | 142000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE |
| FEAT | SPECIAL FEATURES | THIS PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES,TOLERANCES,FIT RESTRICTIONS,MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM,OR SERIOUS INJURY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASK | HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER |
| AATC | EXTENDED WASHER DIAMETER | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.047 INCHES NOMINAL |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| MATT | MATERIAL | STEEL COMP 601 OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
