Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 450-10-202, a Vernitron Corp item with the NSN 5905007638900 that is listed alongside the description “Resistor Variable Nonwire Wound.” If you are interested in part number 450-10-202 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 450-10-202 is specifically listed with the NSN 5905-00-763-8900, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Vernitron Corp, this NSN part was specifically produced under CAGE Code 84048. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-763-8900 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 007638900 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3059P-001-202 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABJT | TERMINAL LENGTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.100 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.036 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.700 INCHES NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7920.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.900 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE |
| CBME | CUBIC MEASURE | 0.074 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7920.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CXHN | SHAFT BEARING TYPE | BEARING |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
