Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 170-8119, a Vishay Thin Film Llc item with the NSN 5905009298825 that is listed alongside the description “Resistor Variable Wire Wound Pre.” If you are interested in part number 170-8119 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 170-8119 is specifically listed with the NSN 5905-00-929-8825, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Vishay Thin Film Llc, this NSN part was specifically produced under CAGE Code 02111. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-929-8825 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 009298825 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 170-8119 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 2.541 INCHES MINIMUM AND 2.603 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.281 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.312 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.07300 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.187 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.641 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.900 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 1.716 INCHES MINIMUM AND 1.721 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.43200 INCHES MINIMUM AND 1.44200 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.09300 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.80 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00600 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS 1ST SECTION AND 10.000 KILOHMS 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 10001-2557878 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.31200 INCHES MINIMUM AND 1.31250 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.06200 INCHES NOMINAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
